| # |
Designation / Job Location |
Company |
Job Skills |
Job Description |
| 1 |
Trainee
Delhi Posted on : 16-03-2010 |
PTC India |
CAD/CAM Min. Exp. : 0 yr/s |
Catia Training
Basic & Advanced Level |
| 2 |
Design Engineer
Bangalore Posted on : 27-02-2010 |
Youvashree Technologies India (P) Limited |
AutoCad, Unigraphics Min. Exp. : 0 yr/s |
Experience in estimating, planning and executing projects. Experience in Gas Turbine Engine, Various Components modeling, 0-4 years experience (Freshers also welcome). If you are interested send me your resume immediately. |
| 3 |
3D Animator / Graphic Designer
Ahmedabad Posted on : 24-02-2010 |
Astron IT Services |
CAD/CAM, AutoCad Min. Exp. : 1 yr/s |
5 Position for 3D Animator and Graphic Designer
Must have good experience with Maya, MAX and other designing softwares.
Any Certification or Degree in Designing or Fine Arts is preferred.
This requirement is for an AutoCad Center. |
| 4 |
Design Engineer
Pune Posted on : 19-02-2010 |
3D Magic |
Catia, Pro/E Min. Exp. : 1 yr/s |
Reverse engineering from Point cloud data. |
| 5 |
Architect / 3D Designer
Faridabad Posted on : 19-02-2010 |
studio 360. Boutique firm working in the domains of exhibitions, retail design and office interiors |
AutoCad, 3D Max, Corel Draw, Photoshop Min. Exp. : 0 yr/s |
Architect/ 3D Designer |
| 6 |
Design Engineer
Pune Posted on : 13-02-2010 |
3D Magic |
Unigraphics Min. Exp. : 7 yr/s |
Will be responsible for reviewing and approving the Manual transmission Part drawings and models for completeness, manufacturability, functionality and the compliance to 'Design change request' (EWO), making the digital markups and communicating the error to Designers. |
| 7 |
Design Engineer
Pune Posted on : 13-02-2010 |
3D Magic |
Unigraphics Min. Exp. : 4 yr/s |
Will be responsible for updating the transmission assembly files, creating exploded views and installation drawings, tolerance stack analysis, transmission part modeling, drawing creation and drawing release. |
| 8 |
Design Engineer
Pune Posted on : 13-02-2010 |
3d magic |
Unigraphics Min. Exp. : 4 yr/s |
Will be responsible for Design and development of Manual transmission internal shift system components (Synchro pack/ Shifting rails/ Forks/ internal shifter). The job involves Design calculations, drawing and model creation, motion analysis layout creation and stack analysis, drawing release. |
| 9 |
Design Engineer
Pune Posted on : 13-02-2010 |
3D Magic |
Unigraphics Min. Exp. : 7 yr/s |
Will be responsible for Design of Manual transmission Housings (Transmission housing, Clutch housing, Differential Covers etc). The job involves drawing and model creation, layout creation and stack analysis and drawing release. |
| 10 |
Design Engineer
Pune Posted on : 13-02-2010 |
3D MAGIC |
Unigraphics Min. Exp. : 4 yr/s |
Will be responsible for Leading the team for Design and development of Clutch System components. The job involves coordinating the Design calculations, drawing and model creation, Translation of BoD or Architecture summary requirements into drawing specifications, layout creation,. . . . . . . |
| 11 |
Draftsman
Mumbai Posted on : 12-02-2010 |
Textile machinery manufacturer & exporter |
AutoCad, Leadership, Managing People Min. Exp. : 0 yr/s |
This is an urgent position so please apply immediately.
Location: Vasai
Incumbent should have expert knowledge in auto cad (mechanical) machine drawings, be able to read existing drawings and make drawings from existing machines. He should be able to supervise fabrication work. . . . . . . |
| 12 |
Design Engineer
Bangalore Posted on : 05-02-2010 |
3D Magic |
CAD/CAM, Catia Min. Exp. : 2 yr/s |
Plastic Design, Product development in Catia V5 R18/ R19 |
| 13 |
Design Engineer
Pune Posted on : 29-01-2010 |
3D Magic |
CAD/CAM, Catia, Pro/E, Unigraphics Min. Exp. : 1 yr/s |
Parametric Reverese engineering in Pro E, Solid works, inventor and imageware |
| 14 |
Trainee
Delhi Posted on : 23-01-2010 |
PTC |
CAD/CAM, Catia Min. Exp. : 0 yr/s |
Cad Cam Training |
| 15 |
CAD Engineer
Bangalore Posted on : 19-01-2010 |
DSP Design Associate Pvt. Ltd |
AutoCad Min. Exp. : 3 yr/s |
ROLE OBJECTIVE
To produce concept, drawings subsequent to gathering sufficient inputs from related authorities, adhering clients requirements
AREAS OF RESPONSIBILITY
1. Prepare Project Drawings
Prepare project drawings to aid the design team.
Perform checks & quantify drawings. . . . . . . |
| 16 |
cad drafstman
Bangalore Posted on : 17-01-2010 |
pratham engineering consultants |
AutoCad, MS Project Min. Exp. : 4 yr/s |
autocad designing of architectural drawings. knowledge of M. S. Project planning |
| 17 |
Design Engineer
Pune Posted on : 16-01-2010 |
nenco.org |
AutoCad, Catia, Hindi Min. Exp. : 1 yr/s |
Design Engineer: must be B. E. Mech/ DME with 1-2 years experience in design/ drawing in a mechanical engineering co. Must have good knowledge of Autocad, CATIA and other CAD. CAM packages. |
| 18 |
Technical Authors (Tech Illustrator-Auto-trol)
Bangalore Posted on : 31-12-2009 |
A European MNC |
Pagemaker, Analytical Skills Min. Exp. : 5 yr/s |
IPC/ IPL Technical Author
a) He has to use customer orientated programs like: Image Master, SAP, Adress, Adobe Acrobat, Office for Preparing and structuring text and illustrations to be incorporated in the Illustrated Parts Catalog - IPC - and Illustrated Parts List IPL, Preparation. . . . . . . |
| 19 |
Design Engineer Unigraphics
Pune Posted on : 29-12-2009 |
3C Solutions India Pvt.Ltd |
Unigraphics, Problem Solving Ability, Leadership, Positive Attitude, Presentation Skills Min. Exp. : 1 yr/s |
Industry Type: Parts Supply/ Engineering solutions/ Tooling
solutions
Functional Area: Engineering Design
Field: Design
Role: Design Engineer |
| 20 |
R & D Engineer - Industrial Cleaners
Coimbatore Posted on : 26-12-2009 |
A Client of Oriental Qualitech Qualitech Training & Services (P) LTD |
AutoCad, Catia, Pro/E, Unigraphics Min. Exp. : 3 yr/s |
Searching and analyzing about the new product development
Prepare design packages with Bill of material
Co-ordinate with sub-con manufacturers
Maintain clearly the department files, details, enquiries, drawings & developments |
| 21 |
CAD/Pattern Master
Malad Posted on : 24-12-2009 |
A client of Kalyug Placement |
Min. Exp. : 7 yr/s |
Wanted Experienced Pattern Master with knowledge of CAD. Our client have installed RichPeace CAD system. Job includes co-ordinating with Buyer as well. |
| 22 |
Civil CAD Trainer
Nigeria Posted on : 21-12-2009 |
CADD CENTRE TRAINING SERVICES PVT LTD |
CAD/CAM, AutoCad Min. Exp. : 1 yr/s |
CADD Centre requires CAD/ PPM Trainers (With expertise in Civil & PPM Software: AutoCAD, Staad. pro, ArchiCAD, MS Project, Primavera etc) for our overseas operations.
Qualification: BE/ Diploma in Civil
Experience: Minimum 1 year experience as a CAD Faculty/ Trainer. Individuals. . . . . . . |
| 23 |
CAD Engineer
Hyderabad Posted on : 16-12-2009 |
Sreeven Infocom Limited |
AutoCad Min. Exp. : 1 yr/s |
Office assistant, Estimation, specification, BOQ, technical documentation, drawings, Should have knowledge in design, drawings should visit sites (within circle) if required. |
| 24 |
CAD Engineer
Gurgaon, Mumbai Posted on : 14-12-2009 |
DSP Design Associate Pvt. Ltd |
Computer Knowledge Min. Exp. : 3 yr/s |
To produce concept, drawings subsequent to gathering sufficient inputs from related authorities, adhering clients requirements.
AREAS OF RESPONSIBILITY
1. Prepare Project Drawings
Prepare project drawings to aid the design team.
Perform checks & quantify drawings to ensure. . . . . . . |
| 25 |
Cnc Milling Operator cum Programmers, Cad/Cam engr
Singapore Posted on : 04-12-2009 |
Private limited company in Singapore |
CAD/CAM, CNC Min. Exp. : 3 yr/s |
Should able to operate, setting, & do 2D or Cam Programming |
| 26 |
Application Engineer
Pune Posted on : 23-11-2009 |
3D CAD Development Company |
Catia, Pro/ E, Unigraphics Min. Exp. : 1 yr/s |
We are Pune based PVT. LTD. company looking for Mechanical engineer with 1-3 yrs exp in 3D CAD for our CAD product development. |
| 27 |
civil draughtsmen
Delhi, pulpheladpur, south delhi Posted on : 22-11-2009 |
Sushant Associates |
AutoCad, 3D Max, Animation, Photoshop Min. Exp. : 1 yr/s |
1 yr experienced civil draughtsman required urgently. |
| 28 |
Architectural Assistant
Delhi Posted on : 18-11-2009 |
Architectural Firm in Delhi |
AutoCad, 3D Max, Corel Draw, Powerpoint, MS Word, Positive Attitude, Presentation Skills, English, Hindi Min. Exp. : 1 yr/s |
Draftsperson/ Architectural Assistant |
| 29 |
Architect/Interior Designer
Bangalore Posted on : 10-11-2009 |
Ode-2-Design is a young design firm catering to various scales of projects |
AutoCad Min. Exp. : 0 yr/s |
A young design firm seeks candidates who are dynamic, quick learners and can take full responsibility for their work to join its team. |
| 30 |
AutoCAD Instructor
Bahrain Posted on : 02-11-2009 |
Anantha Information Services |
AutoCad Min. Exp. : 3 yr/s |
AutoCAD Trainer/ Instructor who is a Certified Autodesk Instructor for a posting in Bahrain. |
| 31 |
DESIGN ENGINEER
Delhi Posted on : 20-10-2009 |
PTC India |
Catia Min. Exp. : 1 yr/s |
To design Welding Fixtures using FIDES & Catia V5. |
| 32 |
Senior Design Engineer
Chennai Posted on : 05-10-2009 |
14 years old company in Moulds & Dies Manufacturing Business |
Positive Attitude, Communication Skills Min. Exp. : 7 yr/s |
8 years Experience
Familiar with automobile components...
Software UG/ Delcam/ Ciimatron
Good attitude
Good communication skills
Guy must be worked in reputed organization. |
| 33 |
CFD Engineer
Bangalore Posted on : 30-09-2009 |
Client of khatav.com |
Min. Exp. : 1 yr/s |
- Perform CFD simulation using Fluent with mesh generation using
Tgrid/ Gambit & post-processing in Fluent
- 1-2 years CFD experience in Fluent, Tgrid/ Gambit
- Exposure to Unix operating system
- Skilled in using MS Office (Word, Excel, PowerPoint)
- Good communication skills and proactive |
| 34 |
Draughtsman (Mech)
Chennai Posted on : 20-09-2009 |
A Forging Company in Chennai |
AutoCad Min. Exp. : 2 yr/s |
Design working experience of Auto Cad in Sheet Metal Industry, tool die designing and forging industry |
| 35 |
Faculty
Karnal Posted on : 05-09-2009 |
Institute |
Communication Skills Min. Exp. : 1 yr/s |
Teach the candidates for Autocad, Pro'e, Archicad. |
| 36 |
Cad Engineer
Chennai Posted on : 23-08-2009 |
CADD CENTRE Pvt ltd |
AutoCad, Catia, Pro/E, Communication Skills Min. Exp. : 0 yr/s |
Coaches, counsel, and trains students in various cad/ cae softwares.
To provide presentations and demos on various softwares
To interact with clients and corporate people. |
| 37 |
Mechanical Engineers
Singapore Posted on : 19-08-2009 |
CADD Centre Training Services |
Min. Exp. : 0 yr/s |
CADD Centre requires CAD/ CAE/ PPM Trainer (With expertise in Mechanical CADD & PPM Software: AutoCAD, Pro/ E, SolidWorks, Ansys, MS Project or Primavera etc) for our Far East operations. |
| 38 |
Industrial Design Engineers
Chennai, CHENNAI-TAMILNADU Posted on : 07-08-2009 |
Appasamy Associates |
AutoCad, Pro/E Min. Exp. : 1 yr/s |
Company Profile:
Leading Medical Devices manufacturing organization for the past four decades having global network of distribution. It is an ISO CERTIFIED ORGANISATION
The Design, Development and Manufacturing facilities are located at Chennai (Tamilnadu State) in India.. . . . . . . |
| 39 |
Tool Design Engineer
Chennai Posted on : 31-07-2009 |
Metal Precision Services ( India ) Pvt Ltd |
Min. Exp. : 1 yr/s |
Designing of Press Tools, Developing process sequence and strip layout. |
| 40 |
Junior Architect
Chennai Posted on : 10-07-2009 |
Interior design architecture |
AutoCad Min. Exp. : 0 yr/s |
Interior Architecture design |
| 41 |
Draft Man
Coimbatore Posted on : 30-05-2009 |
A Leading automation Company |
Min. Exp. : 0 yr/s |
A Leading automation Company needs DraftMan |
| 42 |
senior design engineer
Pune, Delhi Posted on : 23-05-2009 |
Alpha Training & Design Solutions Pvt. Ltd. |
Min. Exp. : 2 yr/s |
Pattern tool design engineer using cad/ cam softwares(like UG, CATIA, PRO-E) |
| 43 |
CADD Engineer
Oman/Muscat Posted on : 22-05-2009 |
CADDCentre Training Services |
AutoCad, Pro/E, MS Project Min. Exp. : 4 yr/s |
Overseas job opportunity for Civil engineers - CADD Centre!
CADD Centre, the largest CAD/ PPM training company in Asia requires CAD/ PPM Trainers (With expertise in Civil & PPM Software: AutoCAD, Staad. pro, ArchiCAD, MS Project, Primavera etc) for its overseas operations. |
| 44 |
Civil Draughstman
Oman/Muscat Posted on : 14-05-2009 |
M P DOMINIC & CO |
Min. Exp. : 2 yr/s |
experience in civil infrastructure and marine works |
| 45 |
GET/DET
Delhi & NCR Posted on : 01-05-2009 |
PTC India |
Min. Exp. : 0 yr/s |
to design automotive components/ tooling on catia v5. |
| 46 |
HVAC Designer
Hyderabad Posted on : 21-04-2009 |
Jytra Engineering Services |
Experience in REVIT is preferable Min. Exp. : 0 yr/s |
1. Experience in REVIT is preferable
2. Creation of HVAC shop drawings
3. Knowledge of 2D & 3D HVAC assemblies |
| 47 |
Design Engineer
Bangalore Posted on : 15-04-2009 |
I-SIT Pvt Ltd |
Min. Exp. : 0 yr/s |
Design Tools |
| 48 |
trainer
Ghaziabad, Modinagar Posted on : 15-04-2009 |
CADD Centre is a 20-yrs old company involved in training students in design softwares. |
Min. Exp. : 0 yr/s |
Designation : Trainer
Experience: 0 year- 2 years
Industry Type: Education/ Training/ Teaching
Keyword Pro/ E, AutoCAD, CATIA, Ansys, 3Ds MAX
Location : Modinagar, Ghaziabad
Education UG - Engineering-Electrical, Engineering-Mechanical |
| 49 |
Trainer - Consultant
Chennai Posted on : 11-04-2009 |
Informix Technologies private limited |
strong knowledge in design and presentation skills Min. Exp. : 1 yr/s |
training people in plant design systems/ PDMS. cad/ cam |
| 50 |
Draughtsman
Coimbatore Posted on : 01-04-2009 |
A Leading Tool & Die Manufacturing Industry |
Auto cad Min. Exp. : 0 yr/s |
Should Understand and contribute to the specification of a design problem.
Use available standards, knowledge and experience to process problems.
Must be able to problem solve, offer design solutions and make decisions.
Have the ability to co-ordinate several projects concurrently. . . . . . . |
| 51 |
CAD/CAM Programmer
UAE/Dubai Posted on : 26-03-2009 |
CAD/CAM Programmer |
Min. Exp. : 4 yr/s |
Job Responsibilities: Generate toolpaths for CNC machines, milling, lathe & wire Issuing process sheet process sheet
Tools selection/ design for special tools
EDM Electrodes design and manufacturing
Jig & Fixtures design according to manufacturing process
Following up. . . . . . . |
| 52 |
Pro/Toolkit Engineer
All India Posted on : 25-03-2009 |
An Engineering Software firm |
Pro/ Toolkit, c/ C++ Min. Exp. : 5 yr/s |
5+ Years experience in PRO/ TOOLKIT with C/ C++. Should have executed at least 5 projects, able to create/ edit features and assembly using PRO/ TOOLKIT. Should have experience in using native PROE in modeling/ assembly/ drafting/ layout/ pro-program. Must have knowledge of geometry. . . . . . . |
| 53 |
Autocad Technician
Kolkata Posted on : 19-02-2009 |
DS Infotech Pvt Ltd |
Min. Exp. : 0 yr/s |
|
| 54 |
ITI Drafts Man
Bangalore Posted on : 17-02-2009 |
Client of Khatav Consulting |
Min. Exp. : 2 yr/s |
Experience in 2D Drawing using AUTOCAD
Accommodation & Food is provided by the company |
| 55 |
AutoCAD Technician
Sharjah Posted on : 12-02-2009 |
A Leading Manufacturing Co. in UAE |
AutoCAD 2000/ Inventor, 2D & 3D drawings Min. Exp. : 3 yr/s |
AutoCAD draughtsman with 3-5 years of Design experience preferably in a manufacturing industry. |
| 56 |
Autocad Technicians
Sharjah Posted on : 10-02-2009 |
A Leading Manufacturing Company in Sharjah, UAE |
AutoCAD 2000/ Inventor, 2D & 3D Drawings, Draughtsman Min. Exp. : 3 yr/s |
Part of the Design & Development team responsible for Design and manufacturing of Assembly Drawings, Sheet metal parts, Factory Layouts, Electrical Layouts and Fabrication Drawing, design of 2D and 3D drawings using Autocad 2000/ Inventor. |
| 57 |
Unigraphics NX Designer
Hyderabad Posted on : 03-02-2009 |
Jytra Engineering Services |
Unigraphics NX4/ NX5 Min. Exp. : 1 yr/s |
Excellent skills on Unigraphics NX4 & NX5 software. Application of Advanced Assemblies, Sheet metal and associative modeling are mandatory. Customization skills would be an added advantage. |
| 58 |
CADD Engineer
Middle East/Gulf Posted on : 17-01-2009 |
CADDCentre Training Services |
With expertise in Civil & PPM Software: AutoCAD, Staad. pro, ArchiCAD, MS Project, Primavera etc) for its overseas operat Min. Exp. : 0 yr/s |
As a CAD Faculty/ Trainer |
| 59 |
Design Engineer
Pune Posted on : 15-01-2009 |
SCSPL |
Min. Exp. : 0 yr/s |
Expertise in Catia, Pro-E, Inventor, Autocad, Hypermesh.
Expertise in various domains |
| 60 |
Software developer
Hyderabad Posted on : 09-01-2009 |
Vaal Triangle |
Min. Exp. : 1 yr/s |
We are looking for enthusiastic, self-motivated individuals with
Borland Delphi/ VB/ VC++/ C# recommended.
2 Plus years of Industry experience in working on applications related to CAD/ CAM software required. |
| 61 |
CAM Programmer
UAE/Dubai Posted on : 22-12-2008 |
Mnasi Enterprises |
Min. Exp. : 5 yr/s |
Candidates will be responsible for preparing program for Core, Cavity, side core and other part of Plastic Injection Molds. He should be familiar with the Tool selection, Process adaption, Cutting parameter selection and effective programming skills.
We are using MasterCam X2 MR2. . . . . . . |
| 62 |
CATIA V5
Hyderabad, Hyderabad/Chennai Posted on : 03-12-2008 |
Satyam Venture Engineering Services Pvt. Ltd., |
CAD(Catia V5)/ CAE(ANSA/ Hypermesh/ ABACUS/ NASTRAN/ Ls-Dyna) Min. Exp. : 3 yr/s |
We have immediate openings in the following domain.
SKILL: CATIA V5 (WITH STRONG EXP. IN INTERIORS, PLASTICS, PRODUCT DESIGN WILL BE AN ADDED ADVANTAGE)
NO OPENINGS IN TOOL DESIGN
EXPERIENCE: 3+ YRS.
LOCATION: HYDERABAD
Candidates who have applied and rejected last 6 months. . . . . . . |
| 63 |
Application Engineer
Delhi & NCR Posted on : 31-10-2008 |
PTC India |
Catia V5 Experience is mandatory. Min. Exp. : 2 yr/s |
To execute Design Projects in Catia V5. |
| 64 |
Mechanical Design Engineer
Bangalore Posted on : 23-10-2008 |
Client of Khatav Consulting |
Min. Exp. : 4 yr/s |
Experience in IDEAS-NX12
Experience in Product Design
Designing Experience in Medical Equipment, Manufacturing, Plastic, Aluminum,
Glass is Preferred (Not Mandatory) |
| 65 |
CATIA 5 designers
Spain Posted on : 16-09-2008 |
Grupo Iniciativas PedreƱa S.L. |
Min. Exp. : 2 yr/s |
Grupo Pedrea Iniciativas is a small company located in Northern Spain which carries out mechanical Industrial Design in 2 and 3 dimensions, using mainly Catia V5 software.
We are looking for technicians specialized in mechanical design from the area of PUNE, with 2 years of experience,. . . . . . . |
| 66 |
AutoCAD
Mumbai Posted on : 25-08-2008 |
Adcraft |
Min. Exp. : 0 yr/s |
AutoCAD operator |
| 67 |
Civil Draftsman
Hyderabad Posted on : 13-08-2008 |
RCMS Pvt Ltd |
Autocad Min. Exp. : 0 yr/s |
CAD Draftsman required with 0-1 year of experience. Qualification: Diploma in civil, B. TEch/ B. E Civil, (Architecture/ Civil Engineering). Good hands on AutoCAD drafting and Architectural plans. |
| 68 |
Design Engineer
Chennai Posted on : 01-08-2008 |
Semansys Technologies |
Min. Exp. : 1 yr/s |
Proven track in Design of Machine Elements, Familiarity in Pro/ Piping, Pro/ Cabling, Concept modeling, and Pro/ Mechanica would be an advantage. Industrial experience and exposure to Welding Technology, Hydraulics & Pneumatics, Sheet metal design & manufacturing, Gears & Transmission,. . . . . . . |
| 69 |
3D-CAD Designer (Casting-Molding)
Southern India, Patna, Visakhapatnam Posted on : 22-07-2008 |
SHINANO DIGI ENGINEERING PVT LTD., EXCLUSIVE CAD DESIGN CENTRE OF JAPANESE EARTH-MOVING MANUFACTURER |
Unigraphics-NX and/ or Pro-E WILD FIRE, CASTING - MOLDING DESIGN, Min. Exp. : 2 yr/s |
3D-CAD MODELLER proficient in UG-NX or Pro-E with 2 to 3 years experience in 3D MODELLING OF AUTOMOTIVE CASTING PARTS and having good knowledge of MOULD & PATTERN DESIGN of complex casting components |
| 70 |
FEA Analyst
Bangalore Posted on : 18-07-2008 |
Client of Corporate Consultancy Services (CCS) |
Min. Exp. : 3 yr/s |
Masters in Mechanical Engineering or Engineering Mechanics with
a strong background in finite element modeling and analysis.
4 to 5 years experience in working with commercial FEA software IDEAS, ANSYS and demonstrated expertise in large scale
finite element modeling and analysis
. . . . . . . |
| 71 |
Architects
Hyderabad Posted on : 11-07-2008 |
RCMS Pvt Ltd |
Min. Exp. : 2 yr/s |
Required Architects having at least 2years of experience in design detailing & Interior, Exterior Elevations for large commercial buildings, malls, etc.,. Salary: Best in Industry. Email your CV to Contact: +91-9959888961 |
| 72 |
SSE/Architect/Delivery Manager
All India, Pune Posted on : 22-06-2008 |
We are one of the Leading Recruitment firm Into IT Segment serving bunchful of clients |
C++, Object ARX, Oen GL, VC++, COM, Java Min. Exp. : 5 yr/s |
Should have worked into Software development side for CAD CAM Softwares.
Should have handled team.
Have sound knowledge C++, Object ARX, Catia, Open GL, UNIX, Linux, Windows.
Should have an Exp of 5+ Years |
| 73 |
Design Engineer
Southern India, Chennai Posted on : 19-06-2008 |
SCR SOFT TECHNOLOGIES |
PRO-E, ANSYS, IDEAS Min. Exp. : 0 yr/s |
The candidate will be responsible for DOING ANALYSIS OF STRUCTURAL BEAMS for Manufacturing industry. |
| 74 |
Design engineer
Pune Posted on : 17-06-2008 |
Small project engineering business |
Tolerances, GDT, Materials, Heat Treatments, design stanards, fixture and tool design, machine tools, AutoCAD, 3D, MS Of Min. Exp. : 3 yr/s |
Fixture design, tool design, plant layout preparation etc. |
| 75 |
Software Engineer
Bangalore Posted on : 10-06-2008 |
Consulting and technology services |
sdlc, c++, com, 3D CAD Min. Exp. : 1 yr/s |
1-3 years of experience in production software development. Knowledge/ experience in 3D CAD product desirable but not mandatory. Knowledge SDLC, Regression test creation, ability to understand and foresee customer situation is required. Very good programming skills in C++, COM is. . . . . . . |
| 76 |
Trainee
All India, Chennai Posted on : 20-05-2008 |
SESols Technologies Pvt. Ltd. |
CAD, VB, SOLIDWORKS, UNIGRAPHICS, C++, C Min. Exp. : 0 yr/s |
CAD software development using VB 6. 0 & SolidWorks. Should be thorough in CAD concepts and possess aptitude for Programming. Call 09282-33-5152 (Mobile) |
| 77 |
Designer
Ghaziabad, NCR, Delhi Posted on : 09-05-2008 |
We are manufacturers for advertising displays and P.O.P. for our multinational clients like Pepsi |
Min. Exp. : 0 yr/s |
He/ She must have a flair to design and will be required to design the P. O. P.
Displays and other advertising material from the inputs inform of sketch and verbal communication. |
| 78 |
Design/CAE/FEA Engineer/Manager
Hyderabad, USA Posted on : 25-04-2008 |
A world class Aerospace Design US Company at Hyderabad |
LS-DYNA, ABAQUS, PATRAN, NASTRAN, ADAMS, UNIGRAPHICS, HYPERMESH, CATIA, CAD, FEA Min. Exp. : 5 yr/s |
Design Engineers, CAE/ FEA Engineers with exp on Unigraphics, LS-Dyna, Hypermesh, Patran or SimXpert |
| 79 |
Module Lead / Project Lead / Tech Leads / Architect
Pune, UK Posted on : 26-03-2008 |
UK Onsite Assignments - Teamcenter Consultants - EDS, Pune & UK. |
Teamcenter Min. Exp. : 5 yr/s |
Job Description: Teamcenter Enterprise/ Engineering Consultants
Work Location: Pune/ Long term Onsite to UK
Req 1:
Exp: 5 12 years
Role: Module Lead/ Project Lead/ Tech Leads/ Architects
Job location: Pune
Teamcenter Engineering 2005 or later, deployed in a four-tier. . . . . . . |
| 80 |
Lead Structural Engineer
Bangalore Posted on : 13-03-2008 |
Client of Corporate Consultancy Services (CCS) |
Min. Exp. : 10 yr/s |
- Experience in design of Topsides and Jackets of Fixed Jacket Structures
- Experience in analysis & design of fixed/ floating offshore structures with knowledge of using SACS
- Analysis & Design includes the following:
- Design under Inservice conditions
- In place analysis. . . . . . . |
| 81 |
Lead Piping Engineer
Bangalore Posted on : 13-03-2008 |
Client of Corporate Consultancy Services (CCS) |
Min. Exp. : 10 yr/s |
- Knowledge of 1. Equipment layout 2. Safety & Escape route layout 3. Piping layout 4. Piping support layout
5. Bill of materials 6. Piping material specification & value material specification.
- Knowledge to analyze the Stress Analysis Reports to improve the system design by. . . . . . . |
| 82 |
Windchill Developer
All India, Bangalore Posted on : 13-03-2008 |
Softwell Inc, USA based consulting company providing ERP and PLM support to various clients. |
Windchill, Java Min. Exp. : 1 yr/s |
Softwell Inc is looking for a Windchill Consultant position in Bangalore for our USA based client. This client is in the business of manufacturing those machines used to make Semi conductor Chips and Intel, Samsung and AMD are some of their clients. They are based in SanJose California. . . . . . . |
| 83 |
Design Engineer(Mechanical)
Bangalore Posted on : 28-02-2008 |
Client of Corporate Consultancy Services (CCS) |
Min. Exp. : 3 yr/s |
Essential Functions (Responsibilities):
Join the team of Life Sciences, India as Design Engineer and deliver the mechanical projects for LS..
The candidate will be responsible for creating detailed CAD designs, assemblies and documentation for Medical Products
Create medium. . . . . . . |
| 84 |
Sr. Design Engineer - Specialist(Pro-E)
Bangalore Posted on : 23-02-2008 |
Client of Corporate Consultancy Services (CCS) |
Min. Exp. : 4 yr/s |
* Bachelor degree in Mechanical/ Automobile Engineering from reputed institute.
* Experience of 4 to 5 years in design of commercial vehicles with strong Engineering fundamentals
* Strong in design and development of forging and castings.
* Strong in engineering fundamentals. . . . . . . |
| 85 |
Sr.Design Engineer(Pro-E)
Bangalore Posted on : 23-02-2008 |
Client of Corporate Consultancy Services (CCS) |
Min. Exp. : 4 yr/s |
* Bachelor degree in Mechanical/ Automobile Engineering from reputed institute.
* Experience of 4 to 5 years in design of commercial vehicles in one or more of following areas
Chassis Design
Design and installation of suspension and steering components
Installation of Power. . . . . . . |
| 86 |
Analysis Engineer - CAB(CAE)
Bangalore Posted on : 23-02-2008 |
Client of Corporate Consultancy Services (CCS) |
Min. Exp. : 2 yr/s |
BE/ ME in Mechanical with focus on structural mechanics and analysis simulation
CAE experience of minimum 2 years in automotive domain, preferably with steel, cast iron and casting components
Experience with meshing tools, preferably Ansa and/ or Hypermesh
Experience in analysis. . . . . . . |
| 87 |
Design Engineer(Mechanical)
Bangalore Posted on : 23-02-2008 |
Client of Corporate Consultancy Services (CCS) |
Min. Exp. : 1 yr/s |
BE (Mechanical engg/ automobile engg ) with 1-3 years of experience in electrical components design/ wiring harness routing for Automobiles
Automotive engineering knowledge
Automotive electrical components knowledge
Good electrical design knowledge
Sheetmetal and or Plastic. . . . . . . |
| 88 |
Design Engineer - CAB(Catia)
Bangalore Posted on : 23-02-2008 |
Client of Corporate Consultancy Services (CCS) |
Min. Exp. : 2 yr/s |
BE (Mechanical/ Production/ Automobile) with 2-3 years of experience
Good design experience in BIW or cabin interior or exterior
Should be capavle of working with cross functional team and with global network of people with engineering, purchasing, global manufacturing
The. . . . . . . |
| 89 |
Building Architect
Bangalore Posted on : 13-02-2008 |
Client of Corporate Consultancy Services (CCS) |
Min. Exp. : 1 yr/s |
Sound knowledge of Autocad, Photoshop, and 3d-Max |
| 90 |
CAE Engineer
Bangalore Posted on : 12-02-2008 |
Client of Corporate Consultancy Services (CCS) |
Min. Exp. : 3 yr/s |
Responsible For Cae Simulation In One Or More Of The Following Areas: Nvh/ Durability/ Impact/ Restraints. Work Closely With The Pd Team To Develop Component/ System & Vehicle Level Design Solutions To Meet Program Objectives |
| 91 |
LeadPipingEngineerOffshore-PDMS, AutoCAD
Bangalore Posted on : 05-02-2008 |
Client of Corporate Consultancy Services (CCS) |
Min. Exp. : 15 yr/s |
*To Lead a team of Engineers and Designer, handling project individually
*Co-ordinate with client to execute the Project.
*Should be able to develop Plot plan, Equipment Layout, piping Study and Preparation of Piping General Arrangements,
Routing Pipelines, Design and Detailing. . . . . . . |
| 92 |
Design Engineers-Sheet Metal(AutoCAD,Solidworks)
Bangalore Posted on : 04-02-2008 |
Client of Corporate Consultancy Services (CCS) |
Min. Exp. : 2 yr/s |
* Experience in sheet metal design like machine guards, electrical cabinets etc.
* Knowledge in aesthetic & ergonomic concepts is preferred. Must have good knowledge in sheet metal design, fabrication & painting.
* Able to work independently with minimum supervision. |
| 93 |
Design Engineers-AutoCAD&Pro-E
Bangalore Posted on : 04-02-2008 |
Client of Corporate Consultancy Services (CCS) |
Min. Exp. : 2 yr/s |
*For development of world-class machine tools with latest trends in technology
in order to meet the growing needs of the market.
*Age below 35 years. |
| 94 |
Design Engineer Abaqus/Nastran
Pune Posted on : 01-02-2008 |
Client of Corporate Consultancy Services (CCS) |
Min. Exp. : 2 yr/s |
- The requirement is in the Automotive Domain in the area of Non-linear FEA more specific to Durability analyses.
- The required candidate should able to independently execute tasks.
- Required FE Pre-post processor (any one is mandatory): Hypermesh/ ANSA
- Required FE. . . . . . . |
| 95 |
HVAC (Piping) Design
Chennai Posted on : 21-01-2008 |
Client of Corporate Consultancy Services (CCS) |
Min. Exp. : 3 yr/s |
Functional Area: HVAC (piping), packaging
S/ w: CATIA (V5) & Digital Buck(not critical) |
| 96 |
Pro-e /Design engineer
Chennai Posted on : 16-01-2008 |
engineering and IT services company |
Pro-e WF Min. Exp. : 0 yr/s |
The candidate will be responsible for 3D Modelling & drawing Manage assemblies. |
| 97 |
Mech. Design Exe.
Mumbai, Thane Posted on : 22-12-2007 |
Service Provider Company In the field of CAD/ CAM/CAE. |
Proengineer, Autocad Min. Exp. : 0 yr/s |
Job Invoves the total responsibility of all design fuctions like product visualisation, Modeling, creating detail Drawing etc. |
| 98 |
Mech Design-ProE,Catia,SolidWorks (Job Code:SRM-MD
Southern India, Mysore Posted on : 04-12-2007 |
Client of CCS (Corporate Consultancy Services) |
Min. Exp. : 5 yr/s |
Shall know Auto cad, Mechanical desktop, Solid works and PROE, Catia
Should have experince of Sheet metal designs, fabrication, tool designs, should have worked with various vendors in India
Thermal Analysis, Design for IP standards is preferred |
| 99 |
CAD Engineer
Southern India, Pondicherry Posted on : 23-11-2007 |
Anantha Information Services |
Unigraphics, Solidedge, ProE Min. Exp. : 0 yr/s |
- Implement CAD Design Projects and Drafting assignments as per the requirements of the Engineering Industry
- Conduct training for Engineering Professionals/ Students in the areas of CAD Design and Drafting
- Develop standards/ templates in project design
|
| 100 |
Senior Project Engineer/Team Lead
Bangalore Posted on : 22-11-2007 |
A specialized provider of services on design validation for automotive customers using CAE tools |
Abaqus, Ls-Dyna, Nastran, Hypermesh, ANSA Min. Exp. : 2 yr/s |
Perform design validation using CAE Analysis tools. Should be familiar with automotive components. Capable of modeling different materials like, plastics, composites, etc... |